Custom Program - LG DLG5002W Owner's Manual

HO TO USE
CYCLE OPTION BUTTONS (cont.)
TO Install the Drying Rack
1_1 With the dryer door open, slide the rack into
the dryer drum.
O Make sure it is seated evenly on the edge
of the inner door rim and resting flat on the
inside of the dryer.
NOTE: Be sure to remove the drying rack
after using the RACK DRY cycle.
CUSTOM PROGRAM
NOTE: You may only save one custom program
at a time. Pressing and holding the CUSTOM
PROGRAM button will overwrite any previously
saved custom program.
. TO Save a Custom Program:
_t Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
_Use the cycle setting buttons to adjust the
settings for that cycle.
O Press the cycle option button(s) for the option
you would like to add. A confirmation
message will be shown in the display.
Press and hold the CUSTOM PROGRAM
button for 3 seconds.
TO Recall a Custom Program:
Turn on the dryer.
Press the CUSTOM PROGRAM button.
O Press the START/PAUSE button to start
the cycle.
52
MFL62512809 en 0122.indd 32 2010.1.22 12:15:14 PM