Cycle Option Buttons - LG DLG5002W Owner's Manual

HOWTO USE
CYCLE OPTION BUTTONS
Your dryer features several additional cycle
options to customize cycles to meet your
individual needs. Certain option buttons also
feature a special function that can be activated
by pressing and holding that option button for 3
seconds.
TO Add Cycle Options to a Cycle:
O Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
O Use the buttons to the
cycle settings adjust
settings for that cycle.
O Press the button for the
cycle option option
you would like to add. A confirmation
message will be shown in the display.
O Press the START/PAUSE button to start the
cycle. The dryer will start automatically.
DAMP DRY BEEP
With this option, the dryer
will beep when the load is
approximately 80% dry. This
allows you to remove faster-
drying lightweight items or items
that you would like to iron or
hang while still slightly damp.
WRINKLE CARE
Selecting this function will tumble
the load periodically for up to 3
hours after the selected cycle,
_i or until the door is opened.
This is helpful in preventing
wrinkles when you are unable to
immediately remove items from the dryer.
RACK DRY
Use RACK DRY with items,
such as wool sweaters, silk,
and lingerie, that should dry flat.
RACK DRY can also be used
with items that should not be
tumbled dry, such as gym shoes
or stuffed animals. Press RACK DRY button to
activate or deactivate the RACK DRY function.
NOTE: NEVER use the rack with a tumble
dry cycle.
CHILD LOCK
Usethis option to prevent unwanted
use of the dryer or to keep cycle
settings from being changed while
the dryer is operating. Pressand hold
the EASY IRONbutton for 3 seconds
to activate or deactivatethe CHILD
LOCKfunction. The lock icon will be shown in the display,
and all controls are disabledexcept the ON/OFFbutton.
NOTE:CHILD LOCKlasts after the end of cycle. If you
want to deactivate this function, Press and hold the EASY
IRONbutton for 3 seconds.
3t
MFL62512809 en 0122.indd 31 2010.1.22 12:15:11 PM