LG Smart 3D Blu-Ray BH6830SW Owner's Manual page 66

66 Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons beJow.
By pressing You can
¢,]) (TV POWER) Turn the TV on or off.
Switch the TV's input source
AV/JNPUT between the TV and other
input sources.
Scan up or down through
PR/CH A / V memorized channeJs.
VOL +_ Adjust the voJume of the TV.
Turn the TV's w)Jume on or
MUTE
off.
@ Note
epending on the unit being connected, you
ay not be able to control your TV using some
the buttons.
Setting up the remote to
control your TV
You can operate yourTV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down (,]) (TV POWER) button, and
press the manufacturer code for your TV with
the numerical buttons see the table below).
i
Manufacturer Code number
LG 1(Default), 2
Zenith 1,3, 4
GoldStar 1,2
Samsung 6, 7
Sony 8, 9
Hitachi 4
2. Release the (,]) (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.