LG Smart 3D Blu-Ray BH6830SW Owner's Manual page 16

16
Connecting
Connecting to Your TV
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
speed HDMI
TM
cable with Ethernet). Connect the
HDMI jack on the player to the HDMI jack on a
H DMI compatible TV or monitor.
D"
Rear of the unit
HDMI cable not include
.,_ @ Note
• Ira connected HDMI device does not accept
the audio output of:the player, the HDMI
device's audio sound may be distorted or
may not output.
• When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to"Resolution setting"on page 18 )
• Select the type of:video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Settings] menu (see page
30).
• Changing the resolution when the
connection has already been established
may result in malfunctions.To solve the
problem, turn offthe player and then turn it
on again.
• When the HDMI connection with HDCP
is not verifled, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
• If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft.)).
Set the TV's source to HDMI (refer toTV's Owner's
manual].
Additional Information for HDMI
* When you connect a HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
- The connected device's video input is set
correctly for this unit.
- The connected device is compatible with
720x480p, 1280x720p, 1920x1080i or
1920x1080p video input.
, Not all HDCP-compatible HDMI or DVI devices
will work with this player.
- The picture will not be displayed properly
with non-HDCP device.