Connecting To Your; System Setting; Initial Setup - LG Smart 3D Blu-Ray BH6830SW Owner's Manual

26 System Setting
G_
3
t_
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
1. Press (.]) (POWER).
The initial setup wizard appears on the screen.
2. Use A / V / < / > to select a display language
and press ENTER (®).
3.
Read and prepare the preparations for the
network settings and then press ENTER (_))
while [Start] is highlighted.
!
Use A / V / < / > to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
6. Select [Next] and press ENTER (®) to apply
network settings.
Network connection status is displayed on the
screen.
For details on network settings, refer to
"Connecting toYour Home Network"on page
21.
Select [Next] and press ENTER (®).
If wired network is connected, the network
connection setting will automatically be
finished.
4. All available networks are displayed on the
screen. Use A / V to select [Wired Network]
or desired SSID of wireless network and press
ENTER (®).
Read and prepare the preparations for the
wireless speaker setting.
If:you have security on your access point, you
need to input the security code as necessary.