Resolution Setting - LG Smart 3D Blu-Ray BH6830SW Owner's Manual

18 Connecting
Resolution setting
The [)layer provides several output resolutions f:or
HDMI OUT jack.You can change the resolution
using [Settings] menu.
1. Press HOME(@).
2. Use < / > to select the [Settings] and press
ENTER (®).The [Settings] menu appears.
3. Use A / V to select [DISPLAY] option then
press > to move to the second level.
4. Use A / V to select the [Resolution] option
then press ENTER (®) to move to the third level.
5. Use A / V to select the desired resolution then
press ENTER (®) to conf:irm your selection.
.-.. @ Note
• If:yourTV does not accept the resolution
you have set on the player, you can set
resolution to 480p as f:ollows:
1. Press _ to open the disc tray.
2 Press [] (STOP) f:or more than 5 seconds.
• If:you select a resolution manually and then
connect the HDMI jack toTV and your TV
does not accept it, the resolution setting is
set to [Auto].
• If:you select a resolution that yourTV
does not accept, the warning message
will appear. After resolution change,
if:you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
° The 1080p video output f:rame rate may
be automatically set to either 24 Hz or
60 Hz depending both on the capability
and pref:erence of: the connected TV and
based on the native video f:rame rate of:the
content on the BD-ROM disc.