The VCR writes programdata (see example below) about the first 10
secondsof every recording.The informationis then displayedthe first
10 secondsof playback.To change the data, see "Changing Time
Stamp Data" on page 25.
Display menu.
Press ACTION.*
[_ll)check
list before you begin.
[]
Clockis setto correct t ime.
[]
Recordtab in place,(See page30.)
2
Display SET UP VCR.
1) Press &_' to select.
2) Press • to display.
• 131e RemoteWamlr_ul_ONtOFF
featureis notavailable.
Set ON or OFF.
1) Press ,LV to select.
2) Press• to set.
• When "OFF" is selected, _e program
data is written on the tape, but will not
be displayed.
Return to normal screen.
Press ACTION twice.
<Time Stamp Example>
OneTouchRecording
Timer Recording
When Clock is not set..,
SELECT/
2s_
&:PLAy
Y:STOP
I_:FF
ACTION
4
24