Optional Equipment Connections - Panasonic SuperFlat CT-F3394 Operating Instructions Manual

INSTALLATION
Optional Equipment Connections
VCR Connection
Follow this diagram when connecting your television to a VCR only.
CONNECTIONS ON BACK OF TV
VCR
=1
CABLESNOTSUPPUED
Incoming
Note: The remote control must be programmed with supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Viewing a video
Procedure
D Option A
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the "FVNIDEO button on the remote control to select the video input (VIDEO t,
VIDEO 2, etc.) connected to your VCR.
3. Begin the video.
r'l Option B
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television
program
Procedure
t-I Option A (Recording,and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chart.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
Option B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the "rVNIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc,) connected to your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
5. Press the TVNIDEO button on the remote control to switch back to TV mode.
6, Tune the television to the television program you want to view,