Icon Menus Operation; Picture; Audio - Panasonic CT-27HL15 Manual

ICON MENUS OPERATION
Icon Menus Operation
Notes:
Some menus vary depending on model.
Refer to page 9 for Icon menu navigation procedures.
PICTURE
Note: While sub-menu features are highlighted, press VOL D,
to adjust or activate.
[] PIC MODE - Lets you choose one of three pre-set
Picture Modes that best suits the program you are
viewing. Selecting this feature will also affect Color
Temperature setting.
PIC MODE - COLOR TEMP DEFAULTSETTINGS
PIC MODE COLOR TEMP
VIVID COOL
STANDARD NORMAL
CINEMA WARM
Note:
[]
[]
[]
[]
[]
[]
Each mode has its own picture settings (Color, Tint, Brightness,
Picture and Sharpness) and Color Temp. settings.
• VIVID - This is the default mode, It provides
enhanced picture contrast and sharpness for
viewing in a welt-lit room.
• STANDARD - Recommended for normal viewing
conditions with subdued room lighting.
• CINEMA - Select this mode for watching movies in
a darkened room. It provides a soft, film-like
picture.
PICTURE - Adjusts white areas of picture.
BRIGHTNESS - Adjusts dark areas of picture.
COLOR - Adjusts desired color intensity.
TINT - Adjusts natural flesh tones.
SHARPNESS - Adjusts clarity of outline detail.
NORMAL - Reset adjustments to factory default
settings.
[] OTHER ADJ.
Highlight OTHER ADJ. and press VOL • to display the sub
sub-menu.
Note: While sub sub-menu features are highlighted, press
VOL _- to select or activate.
• COLOR TEMP (temperature) - To increase or decrease
WARM (red) and COOL (blue) colors to suit personal
preferences.
• NATURAL COLOR - To increase the color reproduction
range with natural color gradation and highly delicate
hues.
• VIDEO NR - Reduces noise in the channel, commonly
called snow.
Note:
3D Y/C FILTER - Minimizes noise and cross color in the
picture.
Above feature is not available in models CT-27HC15 and
CT-32HC15.
COLOR MATRIX - Available only with 480p signal.
Select HD or SD to automatically adjust color
parameters for HD (high definition) and SD (standard
definition). This feature is not selectabte when viewing
regular TV (NTSC) program.
Note: When viewing a non-standard DTV signal
format, you can change color parameters
manually for the best picture quality.
VM (VELOCITY MODULATION) - Increases picture
sharpness and provides crisp white to black transitions.
MPEG NR - This feature reduces the block noise caused
by the MPEG video compression used in DVD and
HDTV sources.
AUDIO
Note: While sub-menu features are highlighted, press
VOL _ to
adjust or activate.
[] MODE Select STEREO, SAP (Second Audio
Program) or MONO. (Use MONO when stereo signal is
weak).
[] BASS - Increase or decrease the bass response.
[] TREBLE - Increase or decrease the treble response.
[] BALANCE - Emphasize the left/right speaker volume.
[] NORMAL - Reset BASS, TREBLE and BALANCE
adjustments to factory default settings.
[] OTHER ADJ.
Note: While sub sub-menu features are highlighted, press
VOL _ to adjust or activate.
• AI SOUND - Equalize overall volume levels across all
channels. (AI sound is not available in VIDEO mode).
• BBE® - BBE High Definition Sound restores clarity and
presence for better speech intelligibility and music
realism.
• SURROUND - Enhances audio response when listening
to stereo.
• HDMI IN - When using HDMI, this feature will let you
switch between Analog audio input and Digital audio
input.
• Auto - Automatically selects Analog / Digital audio.
• Analog - Selects analog audio signal received via
separate RCA terminals.
10o