Olympus STYLUS 700 Advanced Manual page 38

1/)
c
.O
o_
o
c
VIDEO OUT ........................................................... Playing back pictures on a TV
NTSC / PAL
The factory default settings differ according to the region where the camera
is sold.
To play back camera images on a TV, set the video output according to your TV's
video signal type.
• TV video signal types by country/region Check the video signal type before
connecting the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
I" _,, _ Connector
cover
Multr-connector "_ _v. I_tj..2_ I Connect to the TV's video
I_ _I::P_"_-,_,,- I input(yeltow) and audio
_ -III/'--_J input (white)terminals
AV cable (provided)
Settings on the camera
Set the mode dial to I'g-I, and press
the POWER button to turn the camera
on.
• The last picture taken is displayed
on the TV. Use the arrow pad
(_<:]_) to select the picture you
want to display.
Settings on the TV
Turn the TV on, and set it to video
input mode.
• For details of switching to video
input, refer to your TV's instruction
manual.
[] .......................................................................................... Display the histogram
OFF / ON
Set the display or nendisptay of the histogram when _ button is pressed in
shooting mode.
38
F RAM E ASSIST ................................. Display the frame assist/Decide the type
OFF / _ /E_:_
Set the display or nondisptay and the type of frame assist to be displayed when
_)ISR
_- button is pressed in shooting mode.