Advertisement
4.
Press inward
on tab on the engine
baffle to release it from
the baffle bracket. See Fig. 7-3.
r
5.
f
Figure 7-3
Slide belt off of engine
pulley and thread through
the
opening
in the deck. See Figure 7-4.
Figure 7-4
6.
Replace with new belt, making
sure belt is firmly
seated on
engine pulley while pulling
from the other side and sliding
it around the transmission
pulley.
Z
Reattach engine
baffle and reassemble
blade as described
in the previous
section.
8.
Turn mower back over and make sure belt is seated on
the transmission
pulley.
Tighten
screw loosened
earlier to
secure belt tension
spring to the transmission.
9.
Reassemble front drive cover.
Replacing Battery
WARNING:
Batteries
contain
sulfuric acid which
may cause burns. Do not short circuit or mutilate
batteries
in any way. Do not put batteries
in fire as
these may burst or release toxic materials.
1.
Loosen star knobs securing upper and lower handles and
carefully fold the upper handle down toward the lower
handle as shown in Fig. 7-5.
f
2.
3.
J
Figure 7-5
Remove the two screws securing
battery
cover to battery
housing
and place them to the side. See Fig. 7-5.
Open battery
cover, remove
positive and negative
leads
from battery,
remove
and replace with new battery.
Connect the positive lead to the positive side of the battery
pack, then connect
the negative
side.
16 I
SECTION 7-- SERVICE
Advertisement
