Advertisement
NOTE: The battery
you have may differ
slightly
from the
Charaina Battery
one shown
in Fig. 7=6. Refer to the Parts List.
4.
5.
+
Positive
Terminal
Negative
Terminal
\
\
\
\\\\
Figure 7-6
J
IMPORTANT:When
replacing
battery
pack in handle panel,
battery
pack must be positioned
with the positive terminal
to the left side and the negative
terminal
to the right side
of panel (Positive terminal
is closest to the key switch).
See Fig. 7=6. Replacing
battery
pack incorrectly
will cause
serious damage.
Reattach battery
cover to battery
housing
by securing
with
the two screws removed
earlier, making
sure to snap the
wire conduit
on the left into place on the housing.
Fold handles back up and tighten
star knobs.
_IL
ARNING:
The battery
contains
corrosive
fluid
and toxic material;
handle with care and keep away
from children.
Do not puncture,
disassemble,
mutilate
or incinerate
the battery.
Explosive
gases
could be vented
during
charging
or discharging.
Use
in a well ventilated
area, away from sources of
ignition.
NOTE*. The special designed
plug on the charger will only fit into
the plug on the battery
box.
1.
Plug the battery
charger into the port on the underside
of
the battery
housing.
See Fig. 7=7.
f
2.
3.
\\
\
\
Figure 7-7
Insert the battery
charger plug into a standard
120 volt
household
outlet.
Charge battery
for 8 to 10 hours before
initial use. Do not charge longer
than 12 hours.
NOTE: For optimal
engine starting
performance
and
battery
life, charge the battery
after every use until the
green LED light on the charger illuminates.
After charging,
disconnect
charger plug from outlet
first,
then disconnect
charger lead from battery.
IMPORTANT.* Do not remove the battery
pack from
the electric
starter housing
for any reason other than
replacement.
IMPORTANT:
Always plug charger lead into battery
pack
lead first, and then insert battery
charger plug into 120
volt standard
household
outlet.
Follow this order of action
every time you charge the battery.
SECTION 7--
SERVICE
I 17
Advertisement
