Lenovo 7515-J9U - ThinkCentre A58 Desktop PC User Manual page 32

4. Install the retainer that comes with your drive on the side of the drive.
Figure 14. Installing the drive retainer
5. Install the drive into the bay.
Figure 15. Installing the drive
6. To reinstall the front bezel, align the plastic tabs on the right side of the front
7. Continue at "Connecting a SATA drive."
Connecting a SATA drive: A SATA optical drive or a SATA hard disk drive can
be connected to any available SATA connector.
To connect a SATA drive:
1. Locate the signal cable that comes with the new drive.
2. Locate an available SATA connector on the system board. See "Locating parts
3. Connect one end of the signal cable to the drive and the other end to the
24
User Guide
bezel with the corresponding holes in the chassis, then pivot the front bezel
inward until it snaps into position on the left side.
on the system board" on page 11.
available SATA connector on the system board.