4. Install the new card into the appropriate slot on the system board. See
18
User Guide
"Locating parts on the system board" on page 11. If you are replacing a PCI
card, remove the old card currently installed before installing the new one.
Notes:
a. The card fits tightly into the card slot. If necessary, alternately move each
side of the card a small amount until it is fully removed from the card slot.
b. If the card is held in place by a retaining latch, press the card retaining latch
1 as shown to disengage the latch. Grasp the card and gently pull it out
of the slot.