Recommended Tools; Precautionary Measures - Dell OptiPlex GX200 Service Manual

Service manual
Table of Contents

Advertisement

Back to Contents Page
Mini Tower Chassis — Removing and Replacing Parts: Dell™ OptiPlex™ GX200 
Systems Service Manual
Overview

Recommended Tools

Precautionary Measures

Internal Views
Computer Cover
Front Bezel
Eject, Power, and Reset Buttons
Front-Panel Inserts
Control Panel
Chassis Intrusion Switch
Overview
This section provides procedures for removing and replacing the components, assemblies, and subassemblies in the Dell OptiPlex mini tower
chassis GX200 system.
Unless otherwise noted, each procedure assumes that the following conditions exist:
You have performed the steps in
l
You have
removed the computer
l
You can replace or reinstall a part by performing the removal procedure in reverse order unless additional information is provided.
l
Recommended Tools
Most of the procedures in this file require the use of one or more of the following tools:
Small flat-blade screwdriver
l
Wide flat-blade screwdriver
l
#1 and #2 Phillips-head screwdrivers
l
1/4-inch nut driver
l
Also, use a wrist grounding strap as explained in "Precautionary Measures."
Precautionary Measures
Before you perform any of the procedures in this file, take a few moments to read the following caution for your personal safety and to prevent
damage to the system from electrostatic discharge (ESD).
CAUTION: FOR YOUR PERSONAL SAFETY AND PROTECTION OF THE EQUIPMENT
Before you start to work on the system, perform the following steps in the sequence listed:
1. Turn off the computer and all peripherals.
2. Disconnect the computer and peripherals from their electrical outlets. Also, disconnect any telephone or telecommunication lines from
the computer. Doing so reduces the potential for personal injury or shock.
3. If you are disconnecting a peripheral from the computer or are removing a component from the system board, wait 10 to 20 seconds
after disconnecting the computer from the electrical outlet before disconnecting the peripheral or removing the component to avoid
"Precautionary
Measures."
cover.
Drives
System Power Supply
Expansion-Card Cage
Riser Boards
System Board Components
Expansion Cards
Memory
Microprocessor/Airflow Shroud/Heat Sink Assembly
System Battery
System Board

Advertisement

Table of Contents
loading

Table of Contents