Assembly; Removing From Carton; Loose Parts - Craftsman 247.889571 Operator's Manual

NOTE:References to rightor left sideof the snowthrowerare
determined from behindthe unit in the operatingposition(standing
directlybehindthe snow thrower,facingthe handlepanel).
REMOVING FROM CARTON
1. Cut the cornersof thecarton and lay the sidesflat on the ground.
Removeand discard all packinginserts.
2. Movethe snowthrowerout of thecarton.
3. Makecertainthe carton has beencompletelyemptiedbefore
discardingit.
LOOSE PARTS
Tworeplacementaugershearpinsare includedin the handle panel.
Referto ReplacingShear Pinsin the Operationsectionfor more
informationregardingshearpin replacement.
ASSEMBLY
1. Placethe shiftleverin the Forward-6position.
2. Observethe lowerreararea of the snowthrowerto be sure both
cablesare alignedwith rollerguidesbeforepivotingthe handle
upward.See Figure1.
Figure1
NOTE:Makecertainthe upperends of eachcableare seatedproperly
in its bracket.
.
Securethehandle bytighteningthe plasticwing knoblocatedon
boththe left and rightsides of the handle.See Figure2. Remove
and discardany rubberbands,if present.They are for packaging
purposesonly.
f
!
/
/
/
Figure2
8