Setting Up The Monitor; Attaching The Base; Connecting Your Monitor - Dell E1609WFP User Manual

Back to Contents Page

Setting Up the Monitor

Dell™ E1609W Flat Panel Monitor User's Guide
Attaching the Base
Connecting Your Monitor
Removing the Stand Base
Removing_the_Stand_for_VESA_wall_mount

Attaching the Base

NOTE: The base is detached when the monitor is shipped from the factory.
To attach the base of the stand to the monitor stand:
1. Place the monitor stand base on a stable table top.
2. Slide the monitor stand body in the correct direction down onto the back until it clicks into place.

Connecting Your Monitor

CAUTION: Before you begin any of the procedures in this section, follow the
Connecting Your Monitor Using a VGA Cable
1. Turn off your computer and disconnect the power cable.
safety instructions.