Table of Contents
Advertisement
2.
Connect the blue VGA cable to the blue connector on the computer and monitor.
3.
Connect the power cable.
Removing the Stand Base
To remove the base of the stand from the monitor:
1.
Place the monitor panel on soft cloth or cushion on a stable flat table.
2. Press and hold the release latch, while pulling the base of the stand away from the monitor.
Removing the Stand for VESA wall mount
To remove the stand assembly from the monitor:
1.
Place the monitor panel on soft cloth or cushion on stable flat table.
2.
Use a screwdriver to remove the three screws on the stand of the monitor as
the below pictures shows.
3.
Remove the stand assembly from monitor.
Back to Contents Page
Advertisement
Table of Contents
