To Change
the Door Panel Insert
(select models)
1. Using a Phillips
screw driver, remove
either the right or
left-hand
door trim strips by removing
the three screws.
2. Grasp the panel insert(s) and gently flex out slightly. Slide
panel(s)
out about
two
inches.
Continue
to flex insert
panel(s) enough
to remove them. Use care, edges may be
sharp.
3. Select color and reinstall
panel(s).
Place insert panel(s)
(notched
corners
at the top) on the inside
of the lower
door panel trim. Make sure the upper
notched
comers of
the insert(s) are under
the control panel.
4. Reinstall the side trim.