Maytag NEPTUNE MAH-3 Use & Care Manual page 5

'_I_S[NG THE CONTROLS
Step
Contm! features vary by model
Push Dial to
Start / Pause
||
Plus
Select the appropriate cycle for the type of load.
This will determine the tumble pattern and spin speed for the cycle.
NOTE: To min#_ize wrinkling of loads, select theWrinkle Control cycle.
Sanitary (select models) - For heavily soiled, colorfast garments.
This cycle heats the water to [ SO°F to eliminate bacteria.
NOTE: If Pause is selected during the heating portion of the Sanitary Cycle, the
washer door w ll remain locked for y our safety
Super Wash - For sturdy, colorfast fabrics and heavily soiled garments.
Norma| - For most fabrics including cottons, linens and normally soiled garments.
Whites (select models) - For white fabrics with or without bleach.
Wrinkle Control - For "wash and wear" and synthetic fabrics and lightly to normally
soiled garments.
Co[ors (select models) - For bright fabrics or fabrics that may bleed.
lDe[icates - For sheer fabrics, bras and lingerie_
Hand Wash
- For wool, sill< and other
hand-wash-only fabrics_
For best results, use liquid detergent.
Quick Wash - For lightly soiled or wrinkled garments needed quic[dy.
Enviro Plus (select models) - For geographic areas where energy and water conserva-
tion is needed.
4