RYING
ACCESSORIES
I)
Open dryer door.
2)
Position drying rack in tumbler placing the two rear legs in the
two recessed areas in the back wall of the dryer.
3)
Place the front lip of the drying rack on top of the lint filter.
4)
Place items to be dried on the rack, leaving space between them
so air can reach all the surfaces.
5)
Close the dryer door.
6)
Use the "time
dry"
cycle. Select time according to moisture
and weight of item. Start the dryer. It may be necessary to reset
the timer if a longer drying time is needed.
SUGGESTED ITEMS
SUGGESTED TEMP. SETTINGS
On Dryer
Sides:
The drying rack hanger fits between the dryer top and the dryer
cabinet.
I)
Place the flange on the hanger in the seam between the top and
the cabinet. Push all the way in.
2)
Face the top of the drying rack toward the side of the dryer
cabinet.
3)
Place the drying rack handle over the lip of the hanger.
On Dryer
Back:
I)
Place the drying rack hanger between the dryer top and the
dryer cabinet just below the back of the control
panel.
2)
Place the flange in the seam and push all the way in.
3)
Face the top of the drying rack toward the back of the dryer
cabinet.
4)
Place the drying rack handle on the lip of the hanger.
i
•
....... 4¸¸¸¸
22