Maytag MFX2571XEB3 User Instructions page 10

Nutrition
Provides nutrition information, including serving size and calories,
for foods from common food groups such as dairy, fruit, grain,
meat and fish, vegetables and others.
Quick Tips
Provides detailed information about the external and internal
features of the refrigerator.
Ice
The ice maker can produce crushed and cubed ice. Before
dispensing ice, press ICE on the display screen to select which
type of ice you would like to dispense. The display screen
indicates which type of ice is selected. See "Water and Ice
Dispensers."
Light
If you want the light to be on continuously, press LIGHT on the
display screen to toggle between the ON and OFF settings. The
display screen indicates which mode is selected.
ON: The dispenser light will remain on at a consistent brightness.
OFF: The dispenser light will remain off except when dispensing
water or ice.
NOTE: The dispenser lights are LEDs that cannot be changed. If
it appears that your dispenser lights are not working, see
"Troubleshooting" for more information.
Water
To select standard or measured dispensing. Measured fill allows
you to dispense water by the ounce, cup, or liter. See "Water and
Ice Dispensers."
Options
Lock
The dispensers can be turned off for easy cleaning or to avoid
unintentional dispensing by small children and pets. See "Water
and Ice Dispensers."
Max Cool
The Max Cool feature assists with periods of frequent use, full
grocery loads, or temporarily warm room temperatures.
On the display screen, press OPTIONS, then MAX COOL. The
display screen indicates whether the feature is on or off. Press
the MAX COOL icon to toggle between settings.
Once activated, the Max Cool setting will remain on for 24 hours
unless manually turned off. The display will continue to show
your normal temperature set points.
NOTE: Setting the freezer to a colder temperature may make
some foods, such as ice cream, harder.
Kitchen Timer
To assist with general kitchen activities, the controls include a
timer feature.
1. On the display screen, press OPTIONS, then TIMER.
2. Use the up and down arrows to adjust the hours and minutes
as desired.
3. To start the timer countdown, press START. The timer will not
initiate if you exit the timer screen without pressing START.
• When the timer is counting down, press PAUSE to pause
the countdown. Press START again to restart the
countdown.
• To reset the timer to zero, press RESET at any time.
• Press MAXIMIZE to increase the size of the countdown
on the display screen. When the countdown reaches zero,
the display will return to the previous screen.
IMPORTANT: When using the timer, you can also use other
control and dispenser features. Press the HOME button on
the dispenser panel. The timer countdown will be shown at
the top of the display screen.
4. When the countdown reaches zero, the timer clock will blink
and a tone will sound, repeating every 30 seconds. Press
RESET to turn off the tone and reset the timer feature.
Water Filter
Provides water filter status and replacement filter ordering
information. After replacing the water filter, press RESET to
change the water filter status. See "Water Filter System."
Use and Care
Provides assistance or service information and brief answers to
some frequently asked questions.
Preference
Allows you to set Language preference. See "Using the
Controls." Allows you to set Ice, Water and Dispensing
preferences. See "Water and Ice Dispensers."
Outage
Provides a power outage history showing the dates and times the
power was out. See "Water and Ice Dispensers."
Ice Maker
Allows you to turn the ice maker on and off. See "Ice Maker and
Ice Storage Bin."
Settings
Time and Date
• To change the time and date displayed, press OPTIONS, then
SE-I-I-INGS, then TIME & DATE.
To change the time, use the up and down arrows.
To change the date, press CHANGE DATE, then use the
arrows to adjust the setting as desired.
Sound Volume
• To adjust the volume of all dispenser and control sounds,
press OPTIONS, then SE-I-I-INGS, then VOLUME. Select the
desired volume, then wait 15 seconds or press BACK.
NOTE: Selecting MUTE will not disable the Door Ajar Alarm.
Screen Brightness
• To adjust the brightness of the display screen, press
OPTIONS, then SETTINGS, then BRIGHTNESS. Select the
desired brightness, then wait 15 seconds or press BACK.
Factory Reset
• To reset all system settings and preferences to the factory
defaults, press OPTIONS, then SE-I-I-INGS, then FACTORY
RESET. On the next screen, press YES to confirm. If you
unintentionally press YES instead of NO, you will have
3 seconds to press CANCEL and retain your custom settings.
IMPORTANT: When choosing to return to the default
settings, all customized preferences will be lost - including
temperature set points, dispensing preferences and presets,
language selection, volume and brightness settings, and time
and date.
10