Glossary - Philips CCB130AT Owner's Manual

54 Glossary
AUDIO lack: jack locatedon the front of the TV/VCR which is
used to record audio from another source.
Automatic Channel Setup: process in which the'i-V/VCR
scansall availablechannels and placesthe ones you receive in its
memory.Then,when you pushthe CH(annel) A/v buttons,you
only scan through channels you receive.
Bands: settings that allow you to tune channels.
• Antenna -VHF (very high frequency;channels
2-13) and UHF (ultra high frequency; channels
14-69).
• Cable - all standard channels can be received without a Cable
Box.
_adjusting increases or decreases the brightness of
the color on the screen.
Color: adjusting palesor brightens the TV/VCR color.
copying a tape using aVCR.
H_ high quality; a feature in the TV/VCR circuitry which pro-
vid_ enhanced picture detail.
The channel to which you set your TV/VCR during
dubbing.The line input channel is alwayschannel 00 (A/V IN).
Mode: a TV/VCR operation.
OTR: One-Touch Recording; a timed recording that starts imme-
diately and records for 30 minutes to eight hours, whichever you
specify.
adjusting increasesor decreasesthe contrast of the pic-
ture on the screen.
adjusting soEens or clarifies the picture on the screen.
Tape Speeds: how fast the tape travels during playback or
recording.
• SP (standard play) - fastest tape speed (recording time for a
T I20 tape is approximately two hours); best picture quality.
• LP (long play) - averagetape speed; playback only.
• SLP (super long play) - slowest tape speed (recordingtime for
a T 120 tape is approximatelysix hours).
T_ adjusting changesthe tints of the picture on theTV/VCR from
purple to green.
VIDEO Jack: jack located on the front of the TV/VCR which is
used to record video from another source.