Advertisement
OTE: lf you went through
tup (in your Quick Use
Guide), this task has already been
completed for you.
Your TV can automatically set
itself for local area (or Cable TV)
channels. This makes it easy for
you to select only the TV stations
in your area when the CH(annel)
• • buttons are pressed.
_
Press the MENU (M) button
on the remote, then press the
MENU at or • buttons to select
the word PROGRAM
with the
TV's on-screen arrow.
_.,>
Press the
button (on the TV
(+)
or the remote) to PROGRAM.
_.._
Press the (+) button again to
start the TV search for area
channels.
Flashing channel numbers will
count upward on the screen as the
"IV looks for channels to "ADD".
Press any button (on the TV or
remote) to stop the channel search
at any time. When the channel
search is completed the TV will
return to the last viewed channel.
_,>
Press STATUS button to clear
the screen
!
Try it out. Press
! CHANNEL AV buttons and
.see which channels have been added.
Remember, if you want to drop any
unwanted channels from the TV's
memory, see the next page on how to
"Manually" add and delete channels.
Note: As the TV searches for
channels to "ADD" into memory the
on-screen display may move (or
jitter slightly). This is normal
operation and does not indicate a
need for service.
"RED"channelnumbers have been
added to the TV's memory.
"WHITE"channelnumbe_ areno_
the TV's program memory.
PRESS*TO
AUTOPROGRAM
CHANNELS
IRAMMING IN PROCESS
I
The TV ._creen will be blocked off
until the search for channels is
done.
I
.
L
6
Advertisement
