Advertisement
--
The
picture for the PIP window
.L can come through the TV"s
ANTENNA or VCR/A UX Inputs
(on the rear of the TV.) The PIP
INPUT control simply tells the TV
which one of these two sources it
is to show in the PIP window
<,_
Press the MENU (M) button
on the remote, then press the
MENU • or Y buttons to select
the word PIP INPUT with the
TV's on-screen arrow.
(-_
Pl'ess the (+) button to select
the source for the PIP picture:
ANTENNA -
for a picture signal coming
from the ANTENNA input on
the rear of the TV.
VCR/AUX -
for a picture signal coming
from the Video Input jack on
the rear of the TV.
Used for VCR (or other direct
video accessory) connections.
Note: The TV's S-VIDEO Input
plug cannot be used as a video
source for the PIP window. Also,
when S-VIDEO is selected for the
main screen INPUT the PIP
window will will not appear.
<_
Press the STATUS button to
clear the screen.
0
Remember, the PIP
screen will be blank unless
a signal is connected to the
selected source (either ANTENNA
or VCR/AUX) on the rear of the
TV.
With ANTENNA selected (as the
PIP INPUT source), the main
screen and PIP window will show
the same picture. The VCR/AUX
inputs (on the rear of the TV) must
be used in order to see a different
channel or picture source in the
PIP window.
For detailson how to view .separate
programs on the PiP window and main
.screen..see the PiP connection .section.
33
Advertisement
