Advertisement
OvU can view the playback of
CR tapes (Video Disc
Players, camcorders, etc). by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the
playback of a VCR tape:
@
Connect the VIDEO and
AUDIO IN(put) jacks on the
"IV to the AUDIO and VIDEO
OUT(put) jacks on the VCR.
Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word INPUT with the TV's
on-screen arrow.
Note: You can press the
CHANNEL ••
buttons to
select "VCR/AUX" (if it has
been added to the TV's channel
memory.) See page 7 for details.
_
Press the (+) button to select
I he VCR/AUX(iliary)
INPUTS
on the rear of the TV.
4_,_
Turn the VCR ON and
PLAY the VCR tape to be
viewed on the TV.
@
gh using the A/V INPUT
jacks, retufia the INPUT display
screen on the TV to ANTENNA.
If you leave the TV in the
VCR/AUX INPUT mode and
there is no signal source connected
to the jacks, you will be seeing
only a blank screen on the TV.
NOTE: If you have a mono (single
audio OUTPUT) VCR, "Y"
Connectors are available (from
your dealer or Parts Information
Center I 800 292-6066) to connect
to the audio inputs on the TV.
PICTURE AND SOUND FROM
PLAYBACK
OF VCR TAPE
VIDEO IN
(YELLOW)
:888
VCR
(EQUIPPED
WITH VIDEO AND
AUDIO OUTPUT
JACKS)
NOTE: THE 'q'V/VCR"
BUTTON
CAN ALSO BE USED TO PLACE
THETV
IN EITHER VCR/AUX OR
S-VIDEO MODES (AS WELL AS
I
_!
18
Advertisement
