Magnavox 27MS343S Owner's Manual page 9

STANDBY O Button
Press to turn theTV on or off (standby).
You also can turn on theTV by pressing
the CH (annel) A/V buttons on the
front of the TV.
SLEEP Button
Press to select a time period (10 min-
utes to 120 minutes in 10-minute incre-
ments) after" which theTV will turn itseff
off, Details are on page 21.
SMART PICTURE Button
Press to select one of the four picture
settings (MOVIES, SPORTS, WEAK
SIGNAL, or PERSONAL).
Details are on page 16.
SMART SOUND Button
Press to select one of the four sound
effect settings: THEATRE, PERSONAL,
VOICE, or MUSIC.
Details are on page 28,
MENU Button
Press to see the TV's on-screen menu.
Press to go to the previous menu or to
remove a menu from the screen,
VOL
(volume)
+/- Buttons
Press to adjust theTV sound level,
DISPLAY Button
Press to see the current channel number"
on the TV screen. Press to remove a
menu from the screen.
STANDBY MUTE_
BOOKMARK
SMAm
PICTURE M_ TV_V
SMART
SOUND MENU
NUTE Button
Press to cancel or restore theTV sound.
Pressing the volume buttons (VOL A/V
orVOL +/-) also will cancel mute and
restore the sound.
CALL Button
Press to switch between the two channels
you bookmarked.
BOOKHARK Button
Press to mark two channels that you can
recall with the CALL button,You cannot
bookmark the Audio/Video In channels
(VIDEO 1 andVIDEO 2).
TV/AV/EXIT Button
Press to select TV channels or the
Audio/Video In channels (VIDEO 1 or
VIDEO 2), Press to remove aTV menu,
HTS Button
Press to select a sound mode if available
with theTV programming: MONO,
STEREO, SAP,or MONO+SAP.
Details are on page 30.
CH (channel) +/- Buttons
Press to select memorized TV channels.
Number Buttons
Press to select TV channels directly. For
single-digit channels, press "0" first, then
the number" of the channel,
For*channels 100 and above, press the 100
button first, then the next two numbers of
the channel. For example, to choose chan-
nel 115, press the 100 button, then
Number 1, then Number 5.
(You can select channels above 69 only if
you have Cable T_. Make sure TV/CABLE
is set to CABLE. Details are on page 11.)