Magnavox 27MS343S Owner's Manual page 12

y_fr u can set your TV to receive local "iV channels
om an Antenna) or Cable TV channels (when
you have Cable iV service). Then, use AUTO PRO-
GRAM to set up the channels that are available for
you.This makes it easy "for you to select only the
available TV stations when you press CH+ or CH-.
Before you start AUTO PROGRAM,connect the
Antenna or Cable TV signal as detailed on pages five-
six; set TWCABLE as described on page 11.
Press MENU to see the menu.
PressVOL + orVOL - repeatedly to
highlight TUN. (tuner).
Press CH+ or CH- to highlight
AUTO PROGRAM.
PressVOL + to start programmingTV
channels. PressVOL- if you need to stop
channel programming during the
process.
When channel setup is complete,TUN-
ING FINISHED will appear briefly.Then
the TV will go to its lowest channel.
m
COLOR 50
BRIGHTNESS 50
CONTRAST 50
SHARPNESS 50
TINT O
BLUEBACK ON
lU 1:4m1:41ii
CHANNEL 2
TV/CABLE TV
ADD/ERASE ADD
MANUAL UP
AUTOPROGRAM _>
CHANNEL 2
TV/CABLE TV
ADD/ERASE ADD
MANUAL UP
AUTOPROGRAM
TV25
AUTO
MONO
Helpful Hints
Press CH + and CH- to see
which channels are in the
TV's memory.You can still
select non-memorized chan-
nels using the Number but-
tons on the remote control.
To delete unwanted channels
from the TV's memory or to
add more channels, see
ADD/ERASE on page 14.
You cannot selectTUN, if
theTV is on theVIDEO 1 or
VIDEO 2 channel. Press
TV/AV/EXIT repeatedly to
get to the TV channels.
12