Table of Contents
Advertisement
SPECIAL FEATURES
Magnetism from nearby appliances might affect the
color of the TV picture.
If this happens, move this unit away from the appliance.
In this TV/VCR, each time power is off, automatic de-
gauss circuit functions. If the color is still not correct,
turn the power off for 1 minute.
R,_LIIfi[O] ILl _!Kmll
• When the end of a tape is reached during recording,
playback, or fast-forward,
the tape will automat-
ically rewind to the beginning (or to the 0:00:00
count reading if the memory function is activated),
power off and tape eject.
• This function is operative when Auto Repeat is set
to the [OFF] position.
• The tape will not auto-rewind during timer recording
or One Touch Recording.
• When the tape is rewound to the preset memory po-
sition or the REW button is pressed during Auto Re-
wind, the tape will not eject and TV/VCR will not
turn off.
G,"I _ti]
ill. I P! F,,?]ll Ill O!,5liil_
• Tracking adjustment will be set automatically (Digi-
tal Tracking function) when you start playback.
• When playing pre-recorded tapes or tapes recorded
on units other than your own, noise lines (black and
white streaks) may appear on the playback picture.
If this occurs, adjust the tracking control by pressing
CH ._..or _.,' button until the streaks disappear. To
return to the DTR function, stop the tape once and
start playback again.
• To set center position, press both CH ... and '_:"but-
ton at the same time.
NOTE: This function is controlled only by the but-
tons on the TV/VCR. The buttons on the remote con-
trol will not adjust tracking.
You can change the language of the on screen display.
Follow the steps below:
1) Press MENU button on the remote control.
2) Select item 5 (LANGUAGE SELECT) using num-
ber button.
3) Select item 1(ENGLISH) or 2 (ESPAIqOL= SPAN-
ISH) using number button.
4) Press MENU button to return to TV mode.
I
- U_GUAGE SELECT -
1 ENGLISH
ON
2 ESPAf_OL
The sleep timer function enables you to turn off the
TV/VCR without using the POWER button after a de-
sired time period,
f
L
Press SLEEP button on the
remote control
repeatedly
until desired SLEEP time is
.,._, _,,,,,...,,
displayed.
SLEEP TIME
DISPLAY
I push
0 minute
0 MINUTE
2 pushes
30 minutes
30 MINUTE
3 pushes
60 minutes
60 MINUTE
4 pushes
90 minutes
90 MINUTE
5 pushes
120 minutes
120 MINUTE
6 pushes
0 minute
0 MINUTE
TO CANCEL
THE SLEEP
TIMER
The turn off time can be determined by the number of
times you press the SLEEP button. Press SLEEP button
on the remote control repeatedly until "SLEEP 0 MIN-
UTE" is displayed.
- 30-
EN
_r_r_r_r
5C10
Advertisement
Table of Contents
