Table of Contents
Advertisement
Use this connection if your cable system connects di-
rectly to your TV/VCR without a converter box.
With this connection you, I) can use your TVNCR Re-
mote Control to select channels,
2) program one or more unscrambled channels for
automatic timer recording.
From Cable System
75-ohm
axial Cable
Ilik'Nli HDIt_ii_
lit _51111 I_![O]IOD!
When using an external input signal(another
VCR or
video camera), connect the player's audio/video output
cables to the AUDIO IN, VIDEO IN jacks of your
TV/VCR. Then press CH. "A" or "V" button or enter
"00" with number button so that AUX appears on the
screen.
AUX
TO COPY A VIDEO CASSETTE
(Requires
another VCR)
Connect your TV/VCR and a Source (Playing) VCR
using the following diagram:
1. Insert a pre-recorded video cassette into the Source
(Playing) VCR.
2. Insert a blank video cassette, or one you want to re-
cord over, into the TVNCR's
cassette compart-
ment.
3. Press SPEED button on the remote control to select
the desired recording speed (SP, LP or SLP).
4. Press CHANNEL • or • button repeatedly so that
"AUX" appears on the screen.
5. Begin playback of the tape in the Source (Playing)
VCR.
6. Press RECORD button on the TV/VCR.
NOTE: For best results
during dubbing,
use the
TV/VCR's front panel controls whenever possible. The
remote control might affect the Source (Playing) VCR's
)layback operation.
[Source (Playing)VCR]
9
'
Audio/Video
adapter cordlnot supplied)
"r ""
- 12-
EN
_ _ _,llr ,A,5BI0
Advertisement
Table of Contents
