Ming; Automatic Channel Memory; To Preset Channel Memory Again - Sears LXI 934.44725590 Owner's Manual

Lxi series 9" color tv/vcr combination
Table of Contents

Advertisement

TWCATV CHANNEL MEMORY PROGRAMMING
You can program the tuner to scan only the channels you receive in your area.
NOTE: Channel memory programming is not needed when using a converter/descrambler
box.
You must use the remote control unit for the following steps:
Attach the smaller end of the_,_,,
F_
supplied AC cord to the AC
"_-x_
120V connector on the back
\\
of the TV/VCR. Then, plug
the other end into a standard
AC outlet.
Press POWER
button to turn on the
TV/VCR.
Note: You must disconnect the car battery cord from
the TVNCR before you can use AC power.
Select item 1 (ENGLISH) or 2 (ESPAI_IOL--SPANISH)
using number i or 2 button.
I
- LANGU_
SELECT -
t ENGUSH
ON
2 ESPNrK_.
i CH
Press SELECT button on the
remote control
unit. The
tuner scans and memorizes
all the active
channels
in
your area.
• The TV/VCR distinguishes between standard TV
channels and CATV automatically.
After scanning, the tuner stops on the lowest memo-
rized channel.
(TV mode: from CH 02/CATV mode: from CH 01)
If you want to recall the selected channels, you can se-
lect the desired channel directly by number button or
CH • or • button on the remote control unit.
TO RETURN
TO TV MODE WHEN
SCANNING
Press MENU button in scanning mode.
Press MENU button.
Select item 4 (CHANNEL
SET UP) using number 4
button.
Press number 1 button re-
peatedly to select [TV] or
[CATV].
-MENU-
I TI_ER PAOGR_IWNG
2 P_,TURE CONTROL
3 SETTN_ CROCK
4 CHANNEL SET UP
5 LANGUAGESa.ECT
6 T_E SEMEN
? USER'SSET up
s CCD SELECT
- CHAk_EL SET UP -
I PtP._.w
I'_t]
2 NJTO PP_SET
3 .I.DI_LETE
CH
f
Select item 2 (AUTO PRE-
i
CH 02
SET) using number 2 button.
The tuner scans and memo-
rizes all the active channels
in your area.
After scanning, the tuner stops on the lowest memo-
rized channel.
(TV mode: from CH02 / CATV mode: from CH01)
If you want to recall the selected channels, you can se-
lect the desired channel directly by number button or
CH • or • button on the remote control unit.
TO RETURN
TO TV MODE WHEN
SCANNING
Press MENU button in scanning mode.
-14-

Advertisement

Table of Contents
loading

Table of Contents