Using Your Refrigerator; Ensuring Proper Air Circulation; Prior To Use; Control Panel Features - LG LSC27925 Series Owner's Manual

ENSURING PROPER AIR CIRCULATION freezer compartment to ensure proper cooling. Your
In order to ensure proper temperatures, air MUST flow refrigerator is now ready for use.
between the refrigerator and freezer sections.
• Cool air enters the freezer through the vents located
at the top of the compartment and exits through the
vents located behind the freezer drawers.
• Cool air from the freezer section enters the fresh
food section through vents located at the top of the
compartment. The air moves down throughout the
compartment and exits through the vents located
behind the crisper drawers.
CONTROL PANEL FEATURES
Press the button for the desire function to review and
select other settings.
REFRIGERATOR AND FREEZER CONTROLS
Initially set the refrigerator and freezer controls to
the recommended (middle) settings by pressing
REFRIGERATOR Graphic and FREEZER Graphic.
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. After 24
hours, adjust the compartments temperatures
as desired . The more lit bars, the colder the
refrigerator and freezer will be.
• Do not block any of these vents with food packages.
If the vents are blocked, airflow will be interrupted and
temperature and moisture aroblems may occur.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer
to the other.
You MUST thoroughly clean both sections to eliminate
odors. To prevent odor transfer and dried out food, wrap
OF cover foods tightly. (See the "Food Storage Guide"
section for details.)
NOTE: If you close the
refrigerator door, you may see /
the freezer door open and ,,/ _, ',_
close again due to pressure _/ _ _, _ l:
from internal air flow. /
PRIOR TO USE
I.Clean your refrigerator thoroughly and wipe off dust
accumulated during shipping.
2. Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3. Let your refrigerator run for at least 2 or 3 hours before
putting food in it. Check the flow of cold air in the
13
Display Off Mode
The display lights up and stays lit when the refrigerator is
plugged in for 60 seconds. After the display lights all off
except the dispenser icon selected (CRUSH, WATER or
CUBE) and the display only lights when door is opened
or display button is pressed. Display turn off 20 seconds
after door is closed or display button pressed. You can
change the display always ON pressing "FREEZER" and
"ICE PLUS" buttons at the same time for 5 seconds. A
tone will sound indicating that the display is ON (Display
Off Mode Deactivate).
Activate the Display Off Mode in same manner as
deactivation.
ICE TYPE
You can select water OF ice.
Select Water, Crushed Ice OFCubed Ice by pressing the
ICE TYPE button to the selection desired. The Water,
Crushed Ice OF Cubed Ice icon will light up to indicate
selection.
Light up the cubed ice lamp by pressing the
selection button. The dot will be illuminated.
Light up the water lamp by pressing the selection
button. The dot will be illuminated.