38
Connecting Your TV
Connecting an HDMI
To view the HDMI
Select HDMI 1, HDMI 2, HDMI 3 or HDMI 4 video input source
on the TV. (Press the INPUT button on the remote control. For more
information, see
To connect a DVI device, you will need:
HDMI
❖
For proper operation, the length of an HDMI
should not exceed 9.8 ft (3m). The recommended length is 6.6 ft
(2m).
3.5mm Stereo to RCA Y-cable
❖
An HDMI
analog audio cables are required (see illustration).
NOTE
NOTE
™
device video:
"Selecting the video input to view" on page
™
to DVI adapter cable
™
to DVI adapter cable transfers video only. Separate
To ensure that the HDMI
When turning on your electronic components, turn on the TV first, and
❖
then the HDMI
When turning off your electronic components, turn off the HDMI™ or
❖
DVI device first, and then the TV.
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed
digital video with high-bandwidth digital content protection, which is being
standardized for reception of high definition video signals. Because this is
an evolving technology, it is possible that some devices may not operate
properly with the TV.
™
or DVI device to the HDMI
™
or DVI device is reset properly:
™
or DVI device.
™
input
83.
™
to DVI adapter cable