Toshiba 58L7350U User Manual page 129

NOTE
Wireless Information
The settings configured in Wireless Setup can be confirmed.
1 Press the QUICK button.
2 Select Wireless Information, and then press the OK button.
3 Press the RED button to check the availability of surrounding APs.
A Wireless Information screen appears when a connection is
successfully made.
Item:
Status
Signal
Speed
Mode
Channel
Network name
Authentication
Encryption
Security key
AP MAC address
TV MAC address
DHCP
IP address
Subnet Mask
Default Gateway
DNS
NOTE
Settings are not saved if the BACK button is pressed before Done is
selected.
Description:
The message, "Connected" appears when the TV is connected to
the AP
The message, "Disconnected" appears when the TV is disconnected
from the AP
Connection signal strength with the AP (STRONG/MEDIUM/WEAK)
The link speed with the AP
Working mode (11a, 11b, 11g, 11n)
The channel in use (1-165)
SSID set
Authentication set
Encryption set
Security Key set
The AP's MAC address appears when the TV is connected to the AP
The TV's MAC address
The message, "Enabled" appears when you use DHCP.
The message, "Disabled" appears when you do not use DHCP.
The TV's IP address
Value of the Subnet Mask
Default GATEWAY's address
DNS's address
Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or
TKIP, the Speed value might be low. We recommend that the Encryption
setting are changed to AES (Under manual setup).
Advanced features
Setting up the Network
129