122
Picture and Sound Controls
Adjusting the audio
Using Audyssey EQ
This feature automatically keeps the volume at the perfect level for
television mounted on a wall or located on a table-top.
1
Press the SETUP button.
2
Select Sound > Audyssey Premium Television > TV Mounting
and press the OK button.
3
Press the p / q (arrow) buttons to select Wall or Table.
Using Audyssey Dynamic Volume
This feature provides a consistent sound volume between television
programs, commercials, and between the loud and soft passages of
movies.
1
Press the SETUP button.
2
Select Sound > Audyssey Premium Television > Dynamic
Volume and press the OK button.
3
Press the p / q (arrow) buttons to select Night, Day, or Off.
NOTE
Audyssey ABX™
Audyssey ABX™ technology uses sophisticated driver analysis and low
frequency monitoring to extend the range and bass of small speakers.
To turn on Audyssey ABX™:
1
Press the SETUP button.
2
Select Sound > Audyssey Premium Television > Audyssey ABX
and press the OK button.
3
Press the p / q (arrow) buttons to select Off, Low, or High.
Audyssey EQ
are set to On.
Using the surround sound feature
Surround settings help to create a thrilling surround sound experience
with deep, rich bass from stereo sound sources. Your TV's audio will
sound fuller, richer, and wider.
Press the SETUP button. Select Sound > Surround, and then
❖
select On or Off.
®
for Wall Mounted or Table-top TVs
If Dynamic Range Control is set to On, this feature is automatically
❖
set to Off.
This feature does not affect the audio signal output from the DIGITAL
❖
AUDIO OUT terminal.
®
and Audyssey Volume Extension
®
®
are default settings that