Setting No Signal Power Down - Toshiba 58L7350U User Manual

100
Basic features

Setting No Signal Power Down

NOTE
To display the time remaining until the TV turns off, press the SLEEP
button.
To cancel the sleep timer, press the SLEEP button repeatedly or press the
p / q (arrow) buttons until it is set to 0 minutes.
NOTE
Setting No Signal Power Down
When an input's setting in this feature is set to On, The TV will
automatically turn itself off after about 15 minutes if no signal is detected.
You can change each input's setting to Off: ANT/CABLE, Video 1, Video
2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3, HDMI 4, or PC.
1 Press the SETUP button.
2 Select Options > Power Management > No Signal Power Down,
and then press the OK button.
3
Press the p / q (arrow) buttons to select the item you want to
change and press the OK button.
4 Press the p / q (arrow) buttons to select On or Off.
5 Press the EXIT button.
NOTE
If a power failure occurs, the sleep timer setting may be cleared.
When the following features are set, the feature that is set for the nearest
time will function.
Sleep Timer
❖
Auto shutdown after 1 hour of inactivity (after powering on by On
❖
Timer)
No signal auto power off (after approximately 15 minutes of no signal)
❖
Default setting for each input is On.
❖
A warning message will appear 1 minute before turning off.
❖