Table of Contents
Advertisement
58 Tro_bleshoot"ing
Troubleshooting
/
General
Symptom
The Power does not turned on.
The unit does not start
playback.
The angle cannot be changed.
Cannot play video, photo or
audio files.
The remote control
does not
work properly.
The unit is plugged
in, but the
power will not turn on or off.
The unit is not operating
normally.
Cause&Solution
* Plug the power cord into the wall outlet
securely.
* Insert a playable
disc. (Check the disc type, color system, and regional
code.)
Place the disc with the playback
side down.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.
Cancel the Rating function
or change
the rating level.
Multi-angles
are not recorded
on the DVD Video being played.
The files are not recorded
in a format that the unit can play.
The unit does not support
the codec of:the video file.
The remote control
is not pointed
at the remote
sensor of:the unit.
The remote control
is too far from the unit.
There is an obstacle
in the path of:the remote control
and the unit.
The batteries in the remote
control
are exhausted.
You can reset the unit as follows.
1. Press and hold the POWER button
for at least five seconds.This
will
force the unit to power off then turn the unit back on.
2. Unplug the power cord, wait at least five seconds, and then plug it in
again.
Advertisement
Table of Contents
