Table of Contents
Advertisement
Co_ecfi_g
21
Resolution
Setting
The [)layer provides
several output
resolutions
for
HDMI OUT and COMPONENTVIDEO
OUTPUT jacks.
You can change
the resolution
using [Setup] menu.
1. Press HOME('_).
2.
Use </>
to select the [Setup] and press ENTER
(®).The
[Setup] menu appears.
3.
Use A / V to select [DISPLAY] option
then
press > to move to the second level.
4.
Use A / V to select the [Resolution]
option
then press ENTER (®) to move to the third level.
Antenna
connection
Connect
the supplied
antenna
for listening
to the
radio.
©
o
g
5.
Use A / V to select the desired resolution
then
press ENTER ((_)) to confirm
your selection.
.-
@
Note
• If your TV does not accept the resolution
you have set on the player, you can set
resolution
to 480p as follows:
1. Press _ to open the disc tray.
2
Press [] (STOP) for more than 5 seconds.
Since several factors affect the resolution
of
video output,
see "Video Output
Resolution"
on page 69.
\__
Rear of:the unit
_-
@
Note
• To prevent noise pickup, keep the AM Loop
antenna
away from the unit and other
components.
• After connecting
the FM wire antenna,
keep
it as horizontal
as possible.
Be sure to fully
extend the FM wire antenna.
Advertisement
Table of Contents
