Table of Contents
Advertisement
72 Appendix
Maintenance
Handling
the
Unit
When
shipping
the
unit
Please save the original
shipping
carton and
packing
materials. If you need to ship the unit, for
maximum
protection,
re-pack the unit as it was
originally
packed at the factory.
Keeping the exterior
surfaces dean
Do not use volatile
liquids such as insecticide
spray near the unit.
Wiping with
strong pressure may damage
the
surface.
Do not leave rubber
or plastic products
in
contact
with the unit for a long period
of time.
Cleaning
the
unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely
dirty, use a soft cloth lightly
moistened
with a mild detergent
solution.
Do not
use strong solvents such as alcohol,
benzine, or
thinner,
as these might
damage
the surface of the
unit.
Maintaining
the
Unit
The unit is a high4ech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
Fordetails, please contact your nearest authorized
service center.
Notes
on Discs
Handling
Discs
Do not touch the playback
side of the disc. Hold
the disc by the edges so that fingerprints
do not
get on the surface. Never stick paper or tape on the
disc.
Storing
Discs
After playing,
store the disc in its case. Do not
expose the disc to direct sunlight
or sources of heat
and never leave it in a parked car exposed
to direct
sunlight.
Cleaning
Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Beforeplaying,
clean the disc with a clean cloth.Wipe the disc from
the center to out.
Do not use strong solvents such asalcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Advertisement
Table of Contents
