Advertisement
Available languages
Available languages
1. Measure
and mark a level line on wall above cooktop
location
for the wood mounting
strip (see illustration
to the right and under step 2 on page 7). Unscrew the
mounting
strip from the hood and discard the screws.
Use #10=2" fiat head screws (included in the parts bag) to
secure the mounting
strip to the drywall. Make sure to hit
the wall studs.
CAUTION:
Due to the weight of this hood,
ensure that the wood strip is attached to all of
the available wall studs (2 studs minimum for
the 30" hood, more for a 36" hood); not into
drywall alone.
1. Drywall
HD0169A
2. Wood Mounting Strip
3. Flat Head Screw
4. Wall Anchor Location
5. Outline of the Back of the Hood
6. Wall Studs
HD0172
11/2"
138 ram)
from
Page 7)
2. Remove filters from hood and set aside.
3. Using a Phillips #2 or a Robertson #2 screwdriver, remove
4 screws retaining the pan to the hood (shaded part on
illustration beside) and set aside.
HD0170
Advertisement
