Operating The Control Panel; Set The Set Auto Button To Program In A Brew Time; Use The Auto On Button To Set The Automatic Brew Time; 1-4 Cup Button - Kenmore ELITE 1009101770A Use & Care Manual

SETTHE Set Auto Button TO PROGRAM IN A BREWTIME:
1. First set the clock. See directions above.
2. Press the Set Auto button and the button's indicator light will flash.
3. Set the time you wish the coffeemaker to begin brewing by pressing the Hour and
Minute buttons. Be sure to set the correct designation of AM or PM.
4. You can make the hours and minutes move more quickly in the clock display
by holding the buttons down.
USE THE Auto On Button TO SET THE AUTOMATIC BREW TIME:
Once you have set the correct time to begin the automatic brewing and the clock has
returned to the time of day, push in the Auto On button. On the display panel under the
time of day the word, Auto will come on, along with the icon of a clock face. These
indicate that the automatic timer is now activated.
The Auto Brew can be cancelled at any time by pressing the Auto On button a second
time. The Auto On light goes out. To check what time the Auto Brew is set for, push in the
Set Auto button and the time will be displayed.
1-4 CUP BUTTON
This special cycle optimizes the flavor
when brewing 1 to 4 cups of coffee, but
it can also be used to increase the brew
strength of any number of cups you are
brewing.
Press 1-4 Cup button once and the blue
light illuminates and the stronger brewing
option is activated. An icon of a coffee
carafe and 1-4 Cup will show on the panel
display under the time (See Fig. 6). Now
press the ON/OFF button to start the
brewing process.
NOTE: The 1-4 Cup cycle button must
be pushed before the ON/OFF button
is pressed. If not, the 1-4 Cup cycle will
not be activated.
Fig. 6
0 0 0 0
[-, _I, i"i€'I
J,.C=_;UU
C3 0 (_
14 _ O_
OO © O©
--QuickBrew--