Electrical Hook-Up; Operation - Kenmore 437.83231 Owner's Manual

AIR INTAKE GRILLE - Dirty air is drawn in 3_0: into the
Kenmore HEPA Air Cleaner.
AIR OUTLET -A_er the air has been cleaned by the HEPA
filter, it is dispersed UPWARDS into the surrounding
atmosphere.
CARRYING HANDLE - A convenient handle is provided to
enable easy relocation of your air cleaner.
FILTER CHANGE DATE CALENDARS - Two filter change
date wheels are provided as a convenient reminder when
to replace the pre-fllter and the HEPA filter.
SET-UP
Visually inspect the HEPA air cleaner upon removing the
unit from its box. Remove and discard any packaging
material. Return the unit if it shows any signs of damage or
mishandling. ThiS unit was thoroughly inspected and tested
at the factory prior to packaging.
Upon start up of your Kenmore HEPA Air Cleaner, set the
' Pre-fllter Change Date Calendar ahead 3 months and the
HEPA Change Date Calendar ahead 2 years to indicate
when the ne_ filter replacement is necessary.
CAUTION: DO NOT place the air cleaner within 3 feet of
any computer or any magnetically sensitive devices such
as floppy disks or tapes.
ELECTRICAL HOOK-UP
Plug the air cleaner into a polarized 120 Volt AC wall outleL
WARNING
To avoid fire or shock hazard, the HEPA air cleaner should
only be plugged into a polarized 120 Volt AC outleL
NEVER operate the HEPA air cleaning system without the
HEPA filter properly installed. Permanent motor damage
could result.
OPERATION
Each time the air cleane_ is operated, turn the control
switch to the Iii (super) position for a fast initia! cleaning for
a few seconds. Then adjust the control switch to the
desired output setting:
III (super) - Maximum operation ° fast initial cleaning
II (high) - Daytime operation - fast fan speed
I (low) - Night-time - quieter operation
Turn IONIZER switch ON.
6