Download  Print this page

Kenmore 437.83231 Owner's Manual page 8

Hepa 100 air cleaning system
Hide thumbs

Advertisement

Strap Fastener
Power Head
Charcoal
Pre-filter
HEPA Rlter
Locking
Mechanism
\
Base
REPLACING THE CHARCOAL
PRE-FILTER
(Model #83237)
Step 4
Remove the filter assembly (consisting of the HEPAfilter
and pre-filter) from the power head.
•Step 5
Removethe strap fastener and carefully remove the pre-filter
and discard.
Step 6
Remove any plastic protective wrapping from the new pre-
filter prior to insertion in.to the HEPA air cleaner. Carefully
wrap the new pre-filter around the HEPA filter and secure
into place with the strap fastener. Proceed to step #10.
CHANGING
THE HEPA FILTER
(Model
#83239)
Step 7
Follow insb_JctJonsthrough Step 6. Remove used HEPA filter
assembly and discard the filter.
Step 8
Remove any protective plastic wrapping and packaging from
the New HEPA filter.
Step 9
Replace the pre-filter by wrapping it around the HEPA
filter and use the strap fastener to secure the pre-filter in
place. Please be sure that the pre-filter has been properly
installed and is laying fiat around the HEPA fiiter.
Step 10
Place the filter assembly into the power head and install
the base.
Note: The HEPA filter assembly was designed to easily Frt
into the power head v@hout any orientation: there is no
top or bottom to the HEPA filter.
8

Advertisement

loading

  Related Manuals for Kenmore 437.83231