Advertisement
Oven Cleaning
(continued)
-@
O
O
Use care when opening
the oven door after the self-cleaning
cycle. Stand to the side of the oven
when opening the door to allow hot
air or steam to escape.
To Start
the
Self-Clean
Cycle
*we recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle
for average to heavy soils (to assure satisfactory results).
To Set the Controls
for a Self-Clean
Cycle:
1.
Be sure the clock shows the correct
time of day.
I"I"1
2.
Push _
"
"appears
in the display.
Z
•
3.
Push the _
until "3:00" appears in the display for a 3 hour cycle, or
t--
:Z:
push the _
until "2:00" appears in the display
for a 2 hour cycle.
4.
As soon as the W
or IV
1 is released, "CLn" appears
in the display.
5.
As soon as the controls
are set, the motor
driven lock will begin to close
automatically
and the "LOCK" indicator
light will flash. DO NOT open
the door while the light is flashing
(it takes about
15 seconds for the
lock to close).
6.
The "LOCK" light will glow
until the cleaning
cycle is completed
or
cancelled,
and the oven temperature
has cooled.
When the Self-Clean
Cycle is Completed:
1.
The time of day will appear in the display window
and the 'LOCK" light
will continue to glow.
2.
Once the oven has cooled down for about 1 HOUR and the "LOCK' light
has gone out, the oven door can be opened.
DO NOT force the oven door open. This can damage the
automatic door locking system. Use caution when opening the door after
the self-cleaning cycle is completed. The oven may still be VERY HOT.
13
Advertisement
