Advertisement
Cooktop Control Pads
Using the Touch Control
Be sure that your finger is placed
in the center of the touch
pad. If the finger
is not placed
on the center of a pad, the
cooktop
may not respond to the selection
made.
Lightly
contact
the pad
with
the fiat
part
of your
entire
fingertip.
Do not just use the narrow
end of your
fingertip.
Cooktop Power Pad
The Cooktop
POWER key pad activates
the entire Cooktop.
To power the cooktop,
touch and hold the POWER key pad
for 2 seconds. A beep wiii sound and the Power LED will glow
(Fig. 11). The cooktop
wiii be in a ready mode for 10 seconds.
If no other key pads are touched
the Cooktop
Main POWER
will turn OFF automatically.
To turn the Main Power OFF
touch and hold the Main POWER key pad for 1 second. A
beep wiii sound and the Power LED wiii turn OFF (Fig. 10).
Fig. 10
Fig. 11
Controls Lock Pad
This feature
allows the cooktop
to be locked
only when the
cooktop
is switched
to OFF. Touch and hold the LOCI( key
pad for 3 seconds. A beep will sound and the Loci< LED will
glow (Fig. 13). Once locked, no other displays
wiii glow and
no Cooking
Zones wiii activate.
To turn the Controls
Loci<
OFF, touch and hold the LOCI( key pad for 3 seconds. A
beep will sound, the Loci< LED wiii turn OFF (Fig. 12) and the
cooktop
may be used normally.
•
Fig. 12
Fig. 13
Error Codes Display Message
The error code will display
in the zone that has the error. The
error will flash through
the code C, X, X (Example
Fig. 14)
where the X is the number of the code. If the zone has been
on and the zone is hot enough to display
H [Example
Fig.
15) and you have an error then you will see C, X, X, H. For
service call I=800=4=MY=HOME®.
Fig. 14
Cooking Zone On/Off
Pad
Each of the Cooking
Zones have separate
ON/OFF
key
pads. Once the Main Power key pad has been touched
to activate
the cooktop,
touch the corresponding
Cooking
Zone ON/OFF
key pad once to activate
the Cooking
Zone
needed.
"-" will appear
in the Alpha-Numeric
display
and
the cooking
zone ON/OFF
LED will glow [Fig. 17). If the
corresponding
UP/DOWN
Arrow
key pad is not touched
within
10 seconds, the request to turn the Cooking
Zone ON
will cancel and the Cooktop
will go back to ready mode. To
turn OFF a Cooking
Zone, touch the Cooking
Zone ON/OFF
key pad once. The Cooking
Zone LED will turn OFF {Fig. 16).
@
Fig. 16
Fig. 17
Power Level Settings
The Cooking
Zones have separate
Power Level Alpha-
Numeric
displays.
Once
active, the Cooking
Zones will
provide
15 Power Levels to choose from. These include 1(Fig.
18), 2, 2, 3, 3., % LI., S, 5., 6, E. (Fig. 19), 7, 8, 9, ,o. Half power
levels [available
between
2 and "/power
level) are indicated
by lighting
the display
decimal
point (Fig. 19). The highest
setting of P or "Power
Boost" provides
approximately
139%
power for 10 minutes (Fig. 20). After 10 minutes, the power
level drops to 9. Each key pad touch (or just holding
down
the Power Level key pad) will scroll through
all the available
power levels for any Cooking
Zone quickly.
Fig. 18
Fig. 19
Fig. 20
Residual Heat Message
Once any Cooking
Zone has been used for cooking
and
turned OFF, and if the cooktop
surface temperature
on any
of the Cooking
Zones is still too HOT, H (Fig. 21) will appear
in the Alpha-Numeric
display
for the affected
Cooking
Zone. The H will continue
to display
if the temperature
is still
too HOT.
The Cooking
Zones may
appear
to be cool while turned ON and after
they have been turned OFF. But the glass
surface
may be HOT from residual
heat
transferred
from the cookware
and burns may
Fig. 21
occur if surface is touched.
Fig. 15
8
Advertisement
