Multi-Stop Trips; Europe And New Zealand - Navman iCN 610 User Manual

9. Multi-stop Trips

You can use the Multi-stop Trip screen to set multiple destination points for your trip. Your route will be
calculated to go via each of these points in the specified order.
Destination points can be added via the Multi-stop Trip screen or by selecting Show Details from the
pop-up menu on the 2D Map screen, then Add to Trip.
You can save up to 200*
* 50 multi-stop trips for iCN 610, 620.
Case Study One: Europe and New Zealand
This case study will show you how to set a multi-stop trip by selecting your country, then area, then
street, then house number for each destination point.
Note: This case study applies to Europe and New Zealand only. For navigating in Australia, Canada
and USA, see page 40.
Step One: Start Your Multi-stop Trip
a. From the Main Menu, select the Multi-stop Trip option.
The Multi-stop Trip screen will display.
b. Select Add, then press OK.
The Add to Trip screen will display.
multi-stop trips, each with up to 14 destination points.
iCN 600 series | User Manual
35