Main Menu Screen - Navman iCN 610 User Manual

iCN 600 series | User Manual
Step Three: Warning Screen
1. Read the warning message.
2. Select Accept, then press OK to confirm that you understand.
The first Tutorial screen will display.
Step Four: Tutorial Screens
1. Read the Tutorial screen.
• To prevent the Tutorial from displaying on startup, use the 8-way toggle to select the
Do not show Tutorial on startup check box, then press OK.
2. Press to move through each Tutorial screen.
The Main Menu screen will display.

Main Menu Screen

• Use the 8-way toggle to select a Main Menu option; confirm a selection by pressing OK.
• Return to the Main Menu screen at any time by pressing
• The Route Information option is only available when a route has been calculated.
See pages 49-50 for more information.
To Turn iCN Off
1. Gently push the GPS receiver back towards the iCN. The receiver will click into place.
2. Complete one of the following:
• iCN 610, 620, 650: Press
displays, select Yes, then press OK. The iCN will turn off.
• iCN 630, 635: Press
for three seconds. When the confirmation message
for three seconds until the iCN turns off.
14
.