Multi-Stop Trips; Europe And New Zealand - Navman iCN 500 series User Manual

10. Multi-stop Trips

You can use the Multi-stop Trip screen to set multiple destination points for your trip. Your route will be
calculated to go via each of these points in the specified order.
Destination points can be added via the Multi-stop Trip screen or by selecting Show Details from the
pop-up menu on the 2D Map screen, then Add to Trip.
You can save up to 200 multi-stop trips, each with up to 14 destination points.
Case Study One: Europe and New Zealand
Th case study will show you how to set a multi-stop trip by selecting your country, then area, then
street, then house number for each destination point.
Note: This case study applies to Europe and New Zealand only. For navigating in Australia, Canada
and USA, see page 44.
Step One: Start Your Multi-stop Trip
a. From the Main Menu, tap Multi-stop Trip.
The Multi-stop Trip screen will display.
b. Tap Add.
The Add to Trip screen will display.
c. Tap Address or POI.
The Destination screen will open.
iCN 500 series | User Manual
39