Tone Settings; Display Settings - Nokia 6230 User Manual

M e n u f u n c t i o n s
• To set the profile to be active
until a certain time up to 24
hours, select Timed
time the profile setting shall end.
When the time set for the profile
expires, the previous profile that
was not timed, becomes active.
• To personalise the profile, select
Personalise. Select the setting
you want to change and make
the changes.
To change your presence status
information, select
and My availability
presence message
status message.

Tone settings

You can change the settings of the
selected active profile.
Press Menu, and select
Tone settings. Select and change
Incoming call alert,
Ringing volume, Vibrating
Message alert tone,
message alert tone,
and Warning tones. You can find the
same settings in the
see "Profiles" on page 47.
Select Alert for to set the phone to
ring only upon calls from phone
numbers that belong to a selected
caller group. Scroll to the caller
group you want or
Mark.
48
Copyright © 2004 Nokia. All rights reserved.
and set the
My presence
or My
to edit your
Settings and
Ringing tone,
alert,
Instant
Keypad tones
Profiles menu,
All calls and press

Display settings

Press Menu, and select
Display settings.
• Select Wallpaper
phone to display a background
image, (wallpaper) when the
phone is in standby mode.
Select Select wallpaper
choose an image from Gallery.
• Select Colour schemes
the colour in some display
components, for example
indicators and signal and battery
bars.
• Select Menu view
the phone displays the main
menu.
• Select Operator logo
phone to display or hide the
operator logo.
• Select Screen saver
saver to choose an animation or
a still image as screen saver from
Gallery. Select in
which time the screen saver will
be activated. Select
activate the screen saver.
Independent of the screen saver
settings, for power saving a
digital clock view will be
activated when for a certain time
no function of the phone has
been used. See
page 14.
Settings and
to set your
and
to change
to set the way
to set your
and Select s.
Time-out after
On to
"Power saving" on