Short retry limit
— Enter the maximum number of
•
transmission attempts if the device does not receive a
clear-to-send signal from the network.
RTS threshold
— Select the data packet size at which the
•
WLAN access point device issues a request to send before
sending the packet.
TX power level
— Select the power level of your device
•
when sending data.
Radio measurements
•
measurements.
Power saving
— Select whether to use the WLAN power
•
saving mechanism to save the power in the device battery.
Using the power saving mechanism enhances the battery
performance but may weaken WLAN interoperability.
To restore all settings to their original values, select
Options
Restore
defaults.
>
WLAN security settings
Select
Menu
Tools
>
>
points
Options
New access
>
>
point and
Options
> Edit.
In the access point settings, select
the desired mode.
WEP security settings
Select
WEP
as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the network
124
— Enable or disable the radio
Settings
Connection
>
point, or select an access
WLAN security mode
is denied to users who do not have the required WEP keys.
When the WEP security mode is in use, and your device
receives a data packet not encrypted with the WEP keys, the
data is discarded.
In an ad-hoc network, all devices must use the same WEP key.
Select
WLAN security settings
WEP key in use
•
Authentication type
•
WEP key settings
•
WEP key settings
In an ad-hoc network, all devices must use the same WEP key.
Select
WLAN security settings
from the following:
WEP encryption
•
length.
WEP key format
•
Access
WEP key data in
>
WEP key
•
and
802.1x security settings
Select
802.1x
802.1x
authenticates and authorises devices to access a
wireless network, and prevents access if the authorisation
process fails.
Select
WLAN security settings
and from the following:
— Select the desired WEP key.
— Select
Open
— Edit the settings for the WEP key.
WEP key settings
>
— Select the desired WEP encryption key
— Select whether you want to enter the
ASCII
or
Hexadecimal
— Enter the WEP key data.
as the WLAN security mode.
and from the following:
© 2010 Nokia. All rights reserved.
or Shared.
and
format.